Jump to content

Properties of metals, metalloids and nonmetals

From Wikipedia, the free encyclopedia

The chemical elements can be broadly divided into metals, metalloids, and nonmetals according to their shared physical and chemical properties. All elemental metals have a shiny appearance (at least when freshly polished); are good conductors of heat and electricity; form alloys with other metallic elements; and have at least one basic oxide. Metalloids are metallic-looking, often brittle solids that are either semiconductors or exist in semiconducting forms, and have amphoteric or weakly acidic oxides. Typical elemental nonmetals have a dull, coloured or colourless appearance; are often brittle when solid; are poor conductors of heat and electricity; and have acidic oxides. Most or some elements in each category share a range of other properties; a few elements have properties that are either anomalous given their category, or otherwise extraordinary.

Properties

[edit]

Metals

[edit]
Pure (99.97%+) iron chips, electrolytically refined, accompanied by a high-purity (99.9999% = 6N) 1 cm3 cube

Elemental metals appear lustrous (beneath any patina); form mixtures (alloys) when combined with other metals; tend to lose or share electrons when they react with other substances; and each forms at least one predominantly basic oxide.

Most metals are silvery looking, high density, relatively soft and easily deformed solids with good electrical and thermal conductivity, closely packed structures, low ionisation energies and electronegativities, and are found naturally in combined states.

Some metals appear coloured (Cu, Cs, Au), have low densities (e.g. Be, Al) or very high melting points (e.g. W, Nb), are liquids at or near room temperature (e.g. Hg, Ga), are brittle (e.g. Os, Bi), not easily machined (e.g. Ti, Re), or are noble (hard to oxidise, e.g. Au, Pt), or have nonmetallic structures (Mn and Ga are structurally analogous to, respectively, white P and I).

Metals comprise the large majority of the elements, and can be subdivided into several different categories. From left to right in the periodic table, these categories include the highly reactive alkali metals; the less-reactive alkaline earth metals, lanthanides, and radioactive actinides; the archetypal transition metals; and the physically and chemically weak post-transition metals. Specialized subcategories such as the refractory metals and the noble metals also exist.

Metalloids

[edit]
A shiny silver-white medallion with a striated surface, irregular around the outside, with a square spiral-like pattern in the middle
Tellurium, described by Dmitri Mendeleev as forming a transition between metals and nonmetals[1]

Metalloids are metallic-looking often brittle solids; tend to share electrons when they react with other substances; have weakly acidic or amphoteric oxides; and are usually found naturally in combined states.

Most are semiconductors, and moderate thermal conductors, and have structures that are more open than those of most metals.

Some metalloids (As, Sb) conduct electricity like metals.

The metalloids, as the smallest major category of elements, are not subdivided further.

Nonmetals

[edit]
25 ml of bromine, a dark red-brown liquid at room temperature

Nonmetallic elements have open structures; tend to gain or share electrons when they react with other substances; and do not form distinctly basic oxides.

Most are gases at room temperature; have relatively low densities; are poor electrical and thermal conductors; have relatively high ionisation energies and electronegativities; form acidic oxides; and are found naturally in uncombined states in large amounts.

Some nonmetals (black P, S, and Se) are brittle solids at room temperature (although each of these also have malleable, pliable or ductile allotropes).

From left to right in the periodic table, the nonmetals can be divided into the reactive nonmetals and the noble gases. The reactive nonmetals near the metalloids show some incipient metallic character, such as the metallic appearance of graphite, black phosphorus, selenium and iodine. The noble gases are almost completely inert.

Comparison of properties

[edit]

Overview

[edit]
(or that are relatively distinct)
     Resemble metals        Relatively distinct     Resemble nonmetals  
Properties compared: (37)   7 (19%) 25  (68%) 5 (13%) 
Physical properties (21)   5 (24%) 14  (67%) 2 (10%) 
 • Form & structure (10)   2 (20%) 
 • Electron-related (6)   1
 • Thermodynamics (5)   2
Chemical properties (16)   2 (13%) 11  (69%) 3 (19%) 
 • Elemental chemistry (6)   3  (50%) 
 • Combined form chemistry (6)   2
 • Environmental chemistry (4) 
                                                                                                                                                                                                       

The characteristic properties of elemental metals and nonmetals are quite distinct, as shown in the table below. Metalloids, straddling the metal-nonmetal border, are mostly distinct from either, but in a few properties resemble one or the other, as shown in the shading of the metalloid column below and summarized in the small table at the top of this section.

Authors differ in where they divide metals from nonmetals and in whether they recognize an intermediate metalloid category. Some authors count metalloids as nonmetals with weakly nonmetallic properties.[n 1] Others count some of the metalloids as post-transition metals.[n 2]

Details

[edit]
Metals[8] Metalloids Nonmetals[8]
Form and structure
Colour
  • nearly all are shiny and grey-white
  • Cu, Cs, Au: shiny and golden[9]
  • shiny and grey-white[10]
  • most are colourless or dull red, yellow, green, or intermediate shades[11]
  • C, P, Se, I: shiny and grey-white
Reflectivity
  • zero or low (mostly)[16] to intermediate[17]
Form
Density
  • often low
Deformability (as a solid)
  • often brittle
  • some (C, P, S, Se) have non-brittle forms[n 6]
Poisson's ratio[n 7]
Crystalline structure at freezing point[47]
Packing & coordination number
  • close-packed crystal structures[48]
  • high coordination numbers
  • relatively open crystal structures[49]
  • medium coordination numbers[50]
  • open structures[51]
  • low coordination numbers
Atomic radius
(calculated)[52]
  • intermediate to very large
  • 112–298 pm, average 187
  • small to intermediate: B, Si, Ge, As, Sb, Te
  • 87–123 pm, average 115.5 pm
  • very small to intermediate
  • 31–120 pm, average 76.4 pm
Allotropes[53][n 11]
  • around half form allotropes
  • one (Sn) has a metalloid-like allotrope (grey Sn, which forms below 13.2 °C[54])
  • all or nearly all form allotropes
  • some (e.g. red B, yellow As) are more nonmetallic in nature
Electron-related
Periodic table block
Outer s and p electrons
  • few in number (1–3)
  • except 0 (Pd); 4 (Sn, Pb, Fl); 5 (Bi); 6 (Po)
  • medium number (3–7)
  • high number (4–8)
  • except 1 (H); 2 (He)
Electron bands: (valence, conduction)
  • nearly all have substantial band overlap
  • Bi: has slight band overlap (semimetal)
Electron behaviour
  • "free" electrons (facilitating electrical and thermal conductivity)
  • valence electrons less freely delocalized; considerable covalent bonding present[57]
  • have Goldhammer-Herzfeld criterion[n 12] ratios straddling unity[61][62]
  • no, few, or directionally confined "free" electrons (generally hampering electrical and thermal conductivity)
Electrical conductivity
... as a liquid[70]
  • falls gradually as temperature rises[n 16]
  • increases as temperature rises
Thermodynamics
Thermal conductivity
Temperature coefficient of resistance[n 17]
  • nearly all positive (Pu is negative)[77]
  • nearly all negative (C, as graphite, is positive in the direction of its planes)[80][81]
Melting point
  • mostly high
  • mostly high
  • mostly low
Melting behaviour
  • volume generally expands[82]
  • some contract, unlike (most)[83] metals[84]
  • volume generally expands[82]
Enthalpy of fusion
  • low to high
  • intermediate to very high
  • very low to low (except C: very high)
Elemental chemistry
Overall behaviour
  • metallic
  • nonmetallic
Ion formation
  • tend to form anions
Bonds
  • seldom form covalent compounds
  • form many covalent compounds
Oxidation number
  • nearly always positive
  • positive or negative[89]
  • positive or negative
Ionization energy
  • relatively low
  • high
Electronegativity
  • usually low
  • high
Combined form chemistry
With metals
With carbon
  • same as metals
With hydrogen (hydrides)
  • covalent, volatile hydrides[98]
  • covalent, gaseous or liquid hydrides
With oxygen (oxides)
  • solid, liquid or gaseous
  • few glass formers (P, S, Se)[103]
  • covalent, acidic
With sulfur (sulfates)
With halogens (halides, esp. chlorides) (see also[124])
  • typically ionic, involatile
  • generally insoluble in organic solvents
  • mostly water-soluble (not hydrolysed)
  • more covalent, volatile, and susceptible to hydrolysis[n 24] and organic solvents with higher halogens and weaker metals[125][126]
  • covalent, volatile[127]
  • usually dissolve in organic solvents[128]
  • partly or completely hydrolysed[129]
  • some reversibly hydrolysed[129]
  • covalent, volatile
  • usually dissolve in organic solvents
  • generally completely or extensively hydrolyzed
  • not always susceptible to hydrolysis if parent nonmetal at maximum covalency for period e.g. CF4, SF6 (then nil reaction)[130]
Environmental chemistry
Molar composition of Earth's ecosphere[n 25]
  • about 14%, mostly Al, Na, Mg, Ca, Fe, K
  • about 17%, mostly Si
  • about 69%, mostly O, H
Primary form on Earth
Required by mammals
  • large amounts needed: Na, Mg, K, Ca
  • trace amounts needed of some others
  • trace amounts needed: B, Si, As
  • large amounts needed: H, C, N, O, P, S, Cl
  • trace amounts needed: Se, Br, I, possibly F
  • only noble gases not needed
Composition of the human body, by weight
  • about 1.5% Ca
  • traces of most others through 92U
  • about 97% O, C, H, N, P
  • others detectable except noble gases

Anomalous properties

[edit]

There were exceptions... in the periodic table, anomalies too—some of them profound. Why, for example, was manganese such a bad conductor of electricity, when the elements on either side of it were reasonably good conductors? Why was strong magnetism confined to the iron metals? And yet these exceptions, I was somehow convinced, reflected special additional mechanisms at work...

Oliver Sacks
Uncle Tungsten (2001, p. 204)

Within each category, elements can be found with one or two properties very different from the expected norm, or that are otherwise notable.

Metals

[edit]

Sodium, potassium, rubidium, caesium, barium, platinum, gold

  • The common notions that "alkali metal ions (group 1A) always have a +1 charge"[136] and that "transition elements do not form anions"[137] are textbook errors. The synthesis of a crystalline salt of the sodium anion Na was reported in 1974. Since then further compounds ("alkalides") containing anions of all other alkali metals except Li and Fr, as well as that of Ba, have been prepared. In 1943, Sommer reported the preparation of the yellow transparent compound CsAu. This was subsequently shown to consist of caesium cations (Cs+) and auride anions (Au) although it was some years before this conclusion was accepted. Several other aurides (KAu, RbAu) have since been synthesized, as well as the red transparent compound Cs2Pt which was found to contain Cs+ and Pt2− ions.[138]

Manganese

  • Well-behaved metals have crystal structures featuring unit cells with up to four atoms. Manganese has a complex crystal structure with a 58-atom unit cell, effectively four different atomic radii, and four different coordination numbers (10, 11, 12 and 16). It has been described as resembling "a quaternary intermetallic compound with four Mn atom types bonding as if they were different elements."[139] The half-filled 3d shell of manganese appears to be the cause of the complexity. This confers a large magnetic moment on each atom. Below 727 °C, a unit cell of 58 spatially diverse atoms represents the energetically lowest way of achieving a zero net magnetic moment.[140] The crystal structure of manganese makes it a hard and brittle metal, with low electrical and thermal conductivity. At higher temperatures "greater lattice vibrations nullify magnetic effects"[139] and manganese adopts less-complex structures.[141]

Iron, cobalt, nickel, gadolinium, terbium, dysprosium, holmium, erbium, thulium

  • The only elements strongly attracted to magnets are iron, cobalt, and nickel at room temperature, gadolinium just below, and terbium, dysprosium, holmium, erbium, and thulium at ultra-cold temperatures (below −54 °C, −185 °C, −254 °C, −254 °C, and −241 °C respectively).[142]

Iridium

  • The only element encountered with an oxidation state of +9 is iridium, in the [IrO4]+ cation. Other than this, the highest known oxidation state is +8, in Ru, Xe, Os, Ir, and Hs.[143]

Gold

  • The malleability of gold is extraordinary: a fist-sized lump can be hammered and separated into one million paperback-sized sheets, each 10 nm thick,[citation needed] 1600 times thinner than regular kitchen aluminium foil (0.016 mm thick).[citation needed]

Mercury

  1. Bricks and bowling balls will float on the surface of mercury thanks to it having a density 13.5 times that of water. Equally, a solid mercury bowling ball would weigh around 50 pounds and, if it could be kept cold enough, would float on the surface of liquid gold.[citation needed]
  2. The only metal having an ionisation energy higher than some nonmetals (sulfur and selenium) is mercury.[citation needed]
  3. Mercury and its compounds have a reputation for toxicity but on a scale of 1 to 10, dimethylmercury ((CH3)2Hg) (abbr. DMM), a volatile colourless liquid, has been described as a 15. It is so dangerous that scientists have been encouraged to use less-toxic mercury compounds wherever possible. In 1997, Karen Wetterhahn, a professor of chemistry specialising in toxic metal exposure, died of mercury poisoning ten months after a few drops of DMM landed on her "protective" latex gloves. Although Wetterhahn had been following the then-published procedures for handling this compound, it passed through her gloves and skin within seconds. It is now known that DMM is exceptionally permeable to (ordinary) gloves, skin, and tissues. And its toxicity is such that less than one-tenth of a ml applied to the skin will be seriously toxic.[144]

Lead

  • The expression, to "go down like a lead balloon" is anchored in the common view of lead as a dense, heavy metal—being nearly as dense as mercury. However, it is possible to construct a balloon made of lead foil, filled with a helium and air mixture, which will float and be buoyant enough to carry a small load.[citation needed]

Bismuth

Uranium

  • The only element with a naturally occurring isotope capable of undergoing nuclear fission is uranium.[146] The capacity of uranium-235 to undergo fission was first suggested (and ignored) in 1934, and subsequently discovered in 1938.[n 28]

Plutonium

  • It is normally true that metals reduce their electrical conductivity when heated. Plutonium increases its electrical conductivity when heated in the temperature range of around –175 to +125 °C.[149] There is evidence that this behavior, and similar with some of the other transuranic elements is due to more complex relativistic and spin interactions that are not captured by simple model of electrical conductivity.[150]

Metalloids

[edit]

Boron

  • Boron is the only element with a partially disordered structure in its most thermodynamically stable crystalline form.[151]

Boron, antimony

Silicon

  1. The thermal conductivity of silicon is better than that of most metals.[citation needed]
  2. A sponge-like porous form of silicon (p-Si) is typically prepared by the electrochemical etching of silicon wafers in a hydrofluoric acid solution.[152] Flakes of p-Si sometimes appear red;[153] it has a band gap of 1.97–2.1 eV.[154] The many tiny pores in porous silicon give it an enormous internal surface area, up to 1,000 m2/cm3.[155] When exposed to an oxidant,[156] especially a liquid oxidant,[155] the high surface-area to volume ratio of p-Si creates a very efficient burn, accompanied by nano-explosions,[152] and sometimes by ball-lightning-like plasmoids with, for example, a diameter of 0.1–0.8 m, a velocity of up to 0.5 m/s and a lifetime of up to 1s.[157] The first ever spectrographic analysis of a ball lightning event (in 2012) revealed the presence of silicon, iron and calcium, these elements also being present in the soil.[158]

Arsenic

Antimony

  • A high-energy explosive form of antimony was first produced in 1858. It is prepared by the electrolysis of any of the heavier antimony trihalides (SbCl3, SbBr3, SbI3) in a hydrochloric acid solution at low temperature. It comprises amorphous antimony with some occluded antimony trihalide (7–20% in the case of the trichloride). When scratched, struck, powdered or heated quickly to 200 °C, it "flares up, emits sparks and is converted explosively into the lower-energy, crystalline grey antimony".[159]

Nonmetals

[edit]

Hydrogen

  1. Water (H2O), a well-known oxide of hydrogen, is a spectacular anomaly.[160] Extrapolating from the heavier hydrogen chalcogenides, namely hydrogen sulfide H2S, hydrogen selenide H2Se, and hydrogen telluride H2Te, water should be "a foul-smelling, poisonous, inflammable gas... condensing to a nasty liquid [at] around –100 °C". Instead, due to hydrogen bonding, water is "stable, potable, odorless, benign, and... indispensable to life".[161]
  2. Less well-known of the oxides of hydrogen is the trioxide, H2O3. Berthelot proposed the existence of this oxide in 1880 but his suggestion was soon forgotten as there was no way of testing it using the technology of the time.[162] Hydrogen trioxide was prepared in 1994 by replacing the oxygen used in the industrial process for making hydrogen peroxide, with ozone. The yield is about 40 per cent, at –78 °C; above around –40 °C it decomposes into water and oxygen.[163] Derivatives of hydrogen trioxide, such as F3C–O–O–O–CF3 ("bis(trifluoromethyl) trioxide") are known; these are metastable at room temperature.[164] Mendeleev went a step further, in 1895, and proposed the existence of hydrogen tetroxide HO–O–O–OH as a transient intermediate in the decomposition of hydrogen peroxide;[162] this was prepared and characterised in 1974, using a matrix isolation technique.[citation needed] Alkali metal ozonide salts of the unknown hydrogen ozonide (HO3) are also known; these have the formula MO3.[164]

Helium

  1. At temperatures below 0.3 and 0.8 K respectively, helium-3 and helium-4 each have a negative enthalpy of fusion. This means that, at the appropriate constant pressures, these substances freeze with the addition of heat.[citation needed]
  2. Until 1999 helium was thought to be too small to form a cage clathrate—a compound in which a guest atom or molecule is encapsulated in a cage formed by a host molecule—at atmospheric pressure. In that year the synthesis of microgram quantities of He@C20H20 represented the first such helium clathrate and (what was described as) the world's smallest helium balloon.[165]

Carbon

  1. Graphite is the most electrically conductive nonmetal, better than some metals.[citation needed]
  2. Diamond is the best natural conductor of heat; it even feels cold to the touch. Its thermal conductivity (2,200 W/m•K) is five times greater than the most conductive metal (Ag at 429); 300 times higher than the least conductive metal (Pu at 6.74); and nearly 4,000 times that of water (0.58) and 100,000 times that of air (0.0224). This high thermal conductivity is used by jewelers and gemologists to separate diamonds from imitations.[citation needed]
  3. Graphene aerogel, produced in 2012 by freeze-drying a solution of carbon nanotubes and graphite oxide sheets and chemically removing oxygen, is seven times lighter than air, and ten per cent lighter than helium. It is the lightest solid known (0.16 mg/cm3), conductive and elastic.[166]

Phosphorus

  • The least stable and most reactive form of phosphorus is the white allotrope. It is a hazardous, highly flammable and toxic substance, spontaneously igniting in air and producing phosphoric acid residue. It is therefore normally stored under water. White phosphorus is also the most common, industrially important, and easily reproducible allotrope, and for these reasons is regarded as the standard state of phosphorus. The most stable form is the black allotrope, which is a metallic looking, brittle and relatively non-reactive semiconductor (unlike the white allotrope, which has a white or yellowish appearance, is pliable, highly reactive and a semiconductor). When assessing periodicity in the physical properties of the elements it needs to be borne in mind that the quoted properties of phosphorus tend to be those of its least stable form rather than, as is the case with all other elements, the most stable form.[citation needed]

Iodine

Notes

[edit]
  1. ^ For example:
    • Brinkley[2] writes that boron has weakly nonmetallic properties.
    • Glinka[3] describes silicon as a weak nonmetal.
    • Eby et al.[4] discuss the weak chemical behaviour of the elements close to the metal-nonmetal borderline.
    • Booth and Bloom[5] say "A period represents a stepwise change from elements strongly metallic to weakly metallic to weakly nonmetallic to strongly nonmetallic, and then, at the end, to an abrupt cessation of almost all chemical properties ...".
    • Cox[6] notes "nonmetallic elements close to the metallic borderline (Si, Ge, As, Sb, Se, Te) show less tendency to anionic behaviour and are sometimes called metalloids."
  2. ^ See, for example, Huheey, Keiter & Keiter[7] who classify Ge and Sb as post-transition metals.
  3. ^ At standard pressure and temperature, for the elements in their most thermodynamically stable forms, unless otherwise noted
  4. ^ Copernicium is reported to be the only metal known to be a gas at room temperature.[20]
  5. ^ Whether polonium is ductile or brittle is unclear. It is predicted to be ductile based on its calculated elastic constants.[25] It has a simple cubic crystalline structure. Such a structure has few slip systems and "leads to very low ductility and hence low fracture resistance".[26]
  6. ^ Carbon as exfoliated (expanded) graphite,[28] and as metre-long carbon nanotube wire;[29] phosphorus as white phosphorus (soft as wax, pliable and can be cut with a knife, at room temperature);[30] sulfur as plastic sulfur;[31] and selenium as selenium wires.[32]
  7. ^ For polycrystalline forms of the elements unless otherwise noted. Determining Poisson's ratio accurately is a difficult proposition and there could be considerable uncertainty in some reported values.[33]
  8. ^ Beryllium has the lowest known value (0.0476) among elemental metals; indium and thallium each have the highest known value (0.46). Around one third show a value ≥ 0.33.[34]
  9. ^ Boron 0.13;[35] silicon 0.22;[36] germanium 0.278;[37] amorphous arsenic 0.27;[38] antimony 0.25;[39] tellurium ~0.2.[40]
  10. ^ Graphitic carbon 0.25;[41] [diamond 0.0718];[42] black phosphorus 0.30;[43] sulfur 0.287;[44] amorphous selenium 0.32;[45] amorphous iodine ~0.[46]
  11. ^ At atmospheric pressure, for elements with known structures
  12. ^ The Goldhammer-Herzfeld criterion is a ratio that compares the force holding an individual atom's valence electrons in place with the forces, acting on the same electrons, arising from interactions between the atoms in the solid or liquid element. When the interatomic forces are greater than or equal to the atomic force, valence electron itinerancy is indicated. Metallic behaviour is then predicted.[58] Otherwise nonmetallic behaviour is anticipated. The Goldhammer-Herzfeld criterion is based on classical arguments.[59] It nevertheless offers a relatively simple first order rationalization for the occurrence of metallic character among the elements.[60]
  13. ^ Metals have electrical conductivity values of from 6.9 × 103 S•cm−1 for manganese to 6.3 × 105 for silver.[63]
  14. ^ Metalloids have electrical conductivity values of from 1.5 × 10−6 S•cm−1 for boron to 3.9 × 104 for arsenic.[65] If selenium is included as a metalloid the applicable conductivity range would start from ~10−9 to 10−12 S•cm−1.[66][67][68]
  15. ^ Nonmetals have electrical conductivity values of from ~10−18 S•cm−1 for the elemental gases to 3 × 104 in graphite.[69]
  16. ^ Mott and Davis[71] note however that 'liquid europium has a negative temperature coefficient of resistance' i.e. that conductivity increases with rising temperature
  17. ^ At or near room temperature
  18. ^ Chedd[94] defines metalloids as having electronegativity values of 1.8 to 2.2 (Allred-Rochow scale). He included boron, silicon, germanium, arsenic, antimony, tellurium, polonium and astatine in this category. In reviewing Chedd's work, Adler[95] described this choice as arbitrary, given other elements have electronegativities in this range, including copper, silver, phosphorus, mercury, and bismuth. He went on to suggest defining a metalloid simply as, 'a semiconductor or semimetal' and 'to have included the interesting materials bismuth and selenium in the book'.
  19. ^ Phosphorus is known to form a carbide in thin films.
  20. ^ See, for example, the sulfates of the transition metals,[104] the lanthanides[105] and the actinides.[106]
  21. ^ Sulfates of osmium have not been characterized with any great degree of certainty.[107]
  22. ^ Common metalloids: Boron is reported to be capable of forming an oxysulfate (BO)2SO4,[108] a bisulfate B(HSO4)3[109] and a sulfate B2(SO4)3.[110] The existence of a sulfate has been disputed.[111] In light of the existence of silicon phosphate, a silicon sulfate might also exist.[112] Germanium forms an unstable sulfate Ge(SO4)2 (d 200 °C).[113] Arsenic forms oxide sulfates As2O(SO4)2 (= As2O3.2SO3)[114] and As2(SO4)3 (= As2O3.3SO3).[115] Antimony forms a sulfate Sb2(SO4)3 and an oxysulfate (SbO)2SO4.[116] Tellurium forms an oxide sulfate Te2O3(SO)4.[117] Less common: Polonium forms a sulfate Po(SO4)2.[118] It has been suggested that the astatine cation forms a weak complex with sulfate ions in acidic solutions.[119]
  23. ^ Hydrogen forms hydrogen sulfate H2SO4. Carbon forms (a blue) graphite hydrogen sulfate C+
    24
    HSO
    4
     • 2.4H2SO4.[120]
    Nitrogen forms nitrosyl hydrogen sulfate (NO)HSO4 and nitronium (or nitryl) hydrogen sulfate (NO2)HSO4.[121] There are indications of a basic sulfate of selenium SeO2.SO3 or SeO(SO4).[122] Iodine forms a polymeric yellow sulfate (IO)2SO4.[123]
  24. ^ layer-lattice types often reversibly so
  25. ^ Based on a table of the elemental composition of the biosphere, and lithosphere (crust, atmosphere, and seawater) in Georgievskii,[131] and the masses of the crust and hydrosphere give in Lide and Frederikse.[132] The mass of the biosphere is negligible, having a mass of about one billionth that of the lithosphere.[citation needed] "The oceans constitute about 98 percent of the hydrosphere, and thus the average composition of the hydrosphere is, for all practical purposes, that of seawater."[133]
  26. ^ Hydrogen gas is produced by some bacteria and algae and is a natural component of flatus. It can be found in the Earth's atmosphere at a concentration of 1 part per million by volume.
  27. ^ Fluorine can be found in its elemental form, as an occlusion in the mineral antozonite[135]
  28. ^ In 1934, a team led by Enrico Fermi postulated that transuranic elements may have been produced as a result of bombarding uranium with neutrons, a finding which was widely accepted for a few years. In the same year Ida Noddack, a German scientist and subsequently a three-time Nobel prize nominee, criticised this assumption, writing "It is conceivable that the nucleus breaks up into several large fragments, which would of course be isotopes of known elements but would not be neighbors of the irradiated element."[147][emphasis added] In this, Noddak defied the understanding of the time without offering experimental proof or theoretical basis, but nevertheless presaged what would be known a few years later as nuclear fission. Her paper was generally ignored as, in 1925, she and two colleagues claimed to have discovered element 43, then proposed to be called masurium (later discovered in 1936 by Perrier and Segrè, and named technetium). Had Ida Noddack's paper been accepted it is likely that Germany would have had an atomic bomb and, 'the history of the world would have been [very] different.'[148]

Citations

[edit]
  1. ^ Mendeléeff 1897, p. 274
  2. ^ Brinkley 1945, p. 378
  3. ^ Glinka 1965, p. 88
  4. ^ Eby et al. 1943, p. 404
  5. ^ Booth & Bloom 1972, p. 426
  6. ^ a b Cox 2004, p. 27
  7. ^ Huheey, Keiter & Keiter 1993, p. 28
  8. ^ a b Kneen, Rogers & Simpson, 1972, p. 263. Columns 2 (metals) and 4 (nonmetals) are sourced from this reference unless otherwise indicated.
  9. ^ Russell & Lee 2005, p. 147
  10. ^ a b c Rochow 1966, p. 4
  11. ^ Pottenger & Bowes 1976, p. 138
  12. ^ Askeland, Fulay & Wright 2011, p. 806
  13. ^ Born & Wolf 1999, p. 746
  14. ^ Lagrenaudie 1953
  15. ^ Rochow 1966, pp. 23, 25
  16. ^ Burakowski & Wierzchoń 1999, p. 336
  17. ^ Olechna & Knox 1965, pp. A991‒92
  18. ^ Stoker 2010, p. 62
  19. ^ Chang 2002, p. 304. Chang speculates that the melting point of francium would be about 23 °C.
  20. ^ New Scientist 1975; Soverna 2004; Eichler, Aksenov & Belozeroz et al. 2007; Austen 2012
  21. ^ Hunt 2000, p. 256
  22. ^ Sisler 1973, p. 89
  23. ^ Hérold 2006, pp. 149–150
  24. ^ Russell & Lee 2005
  25. ^ Legit, Friák & Šob 2010, p. 214118-18
  26. ^ Manson & Halford 2006, pp. 378, 410
  27. ^ a b McQuarrie & Rock 1987, p. 85
  28. ^ Chung 1987; Godfrin & Lauter 1995
  29. ^ Cambridge Enterprise 2013
  30. ^ Faraday 1853, p. 42; Holderness & Berry 1979, p. 255
  31. ^ Partington 1944, p. 405
  32. ^ Regnault 1853, p. 208
  33. ^ Christensen 2012, p. 14
  34. ^ Gschneidner 1964, pp. 292‒93.
  35. ^ Qin et al. 2012, p. 258
  36. ^ Hopcroft, Nix & Kenny 2010, p. 236
  37. ^ Greaves et al. 2011, p. 826
  38. ^ Brassington et al. 1980
  39. ^ Martienssen & Warlimont 2005, p. 100
  40. ^ Witczak 2000, p. 823
  41. ^ Marlowe 1970, p. 6;Slyh 1955, p. 146
  42. ^ Klein & Cardinale 1992, pp. 184‒85
  43. ^ Appalakondaiah et al. 2012, pp. 035105‒6
  44. ^ Sundara Rao 1950; Sundara Rao 1954; Ravindran 1998, pp. 4897‒98
  45. ^ Lindegaard & Dahle 1966, p. 264
  46. ^ Leith 1966, pp. 38‒39
  47. ^ Donohoe 1982; Russell & Lee 2005
  48. ^ Gupta et al. 2005, p. 502
  49. ^ Walker, Newman & Enache 2013, p. 25
  50. ^ Wiberg 2001, p. 143
  51. ^ Batsanov & Batsanov 2012, p. 275
  52. ^ Clementi & Raimondi 1963; Clementi, Raimondi & Reinhardt 1967
  53. ^ Addison 1964; Donohoe 1982
  54. ^ Vernon 2013, p. 1704
  55. ^ Parish 1977, pp. 34, 48, 112, 142, 156, 178
  56. ^ a b Emsley 2001, p. 12
  57. ^ Russell 1981, p. 628
  58. ^ Herzfeld 1927; Edwards 2000, pp. 100–103
  59. ^ Edwards 1999, p. 416
  60. ^ Edwards & Sienko 1983, p. 695
  61. ^ a b Edwards & Sienko 1983, p. 691
  62. ^ Edwards et al. 2010
  63. ^ Desai, James & Ho 1984, p. 1160; Matula 1979, p. 1260
  64. ^ Choppin & Johnsen 1972, p. 351
  65. ^ Schaefer 1968, p. 76; Carapella 1968, p. 30
  66. ^ Glazov, Chizhevskaya & Glagoleva 1969 p. 86
  67. ^ Kozyrev 1959, p. 104
  68. ^ Chizhikov & Shchastlivyi 1968, p. 25
  69. ^ Bogoroditskii & Pasynkov 1967, p. 77; Jenkins & Kawamura 1976, p. 88
  70. ^ Rao & Ganguly 1986
  71. ^ Mott & Davis 2012, p. 177
  72. ^ Antia 1998
  73. ^ Cverna 2002, p.1
  74. ^ Cordes & Scaheffer 1973, p. 79
  75. ^ Hill & Holman 2000, p. 42
  76. ^ Tilley 2004, p. 487
  77. ^ Russell & Lee 2005, p. 466
  78. ^ Orton 2004, pp. 11–12
  79. ^ Zhigal'skii & Jones 2003, p. 66: 'Bismuth, antimony, arsenic and graphite are considered to be semimetals ... In bulk semimetals ... the resistivity will increase with temperature ... to give a positive temperature coefficient of resistivity ...'
  80. ^ Jauncey 1948, p. 500: 'Nonmetals mostly have negative temperature coefficients. For instance, carbon ... [has a] resistance [that] decreases with a rise in temperature. However, recent experiments on very pure graphite, which is a form of carbon, have shown that pure carbon in this form behaves similarly to metals in regard to its resistance.'
  81. ^ Reynolds 1969, pp. 91–92
  82. ^ a b Wilson 1966, p. 260
  83. ^ Wittenberg 1972, p. 4526
  84. ^ Habashi 2003, p. 73
  85. ^ Bailar et al. 1989, p. 742
  86. ^ Hiller & Herber 1960, inside front cover; p. 225
  87. ^ Beveridge et al. 1997, p. 185
  88. ^ a b Young & Sessine 2000, p. 849
  89. ^ Bailar et al. 1989, p. 417
  90. ^ Metcalfe, Williams & Castka 1966, p. 72
  91. ^ Chang 1994, p. 311
  92. ^ Pauling 1988, p. 183
  93. ^ Mann et al. 2000, p. 2783
  94. ^ Chedd 1969, pp. 24–25
  95. ^ Adler 1969, pp. 18–19
  96. ^ Hultgren 1966, p. 648
  97. ^ Bassett et al. 1966, p. 602
  98. ^ Rochow 1966, p. 34
  99. ^ Martienssen & Warlimont 2005, p. 257
  100. ^ Sidorov 1960
  101. ^ Brasted 1974, p. 814
  102. ^ Atkins 2006 et al., pp. 8, 122–23
  103. ^ Rao 2002, p. 22
  104. ^ Wickleder, Pley & Büchner 2006; Betke & Wickleder 2011
  105. ^ Cotton 1994, p. 3606
  106. ^ Keogh 2005, p. 16
  107. ^ Raub & Griffith 1980, p. 167
  108. ^ Nemodruk & Karalova 1969, p. 48
  109. ^ Sneed 1954, p. 472; Gillespie & Robinson 1959, p. 407
  110. ^ Zuckerman & Hagen 1991, p. 303
  111. ^ Sanderson 1967, p. 178
  112. ^ Iler 1979, p. 190
  113. ^ Sanderson 1960, p. 162; Greenwood & Earnshaw 2002, p. 387
  114. ^ Mercier & Douglade 1982
  115. ^ Douglade & Mercier 1982
  116. ^ Wiberg 2001, p. 764
  117. ^ Wickleder 2007, p. 350
  118. ^ Bagnall 1966, pp. 140−41
  119. ^ Berei & Vasáros 1985, pp. 221, 229
  120. ^ Wiberg 2001, p. 795
  121. ^ Lidin 1996, pp. 266, 270; Brescia et al. 1975, p. 453
  122. ^ Greenwood & Earnshaw 2002, p. 786
  123. ^ Furuseth et al. 1974
  124. ^ Holtzclaw, Robinson & Odom 1991, pp. 706–07; Keenan, Kleinfelter & Wood 1980, pp. 693–95
  125. ^ Kneen, Rogers & Simpson 1972, p. 278
  126. ^ Heslop & Robinson 1963, p. 417
  127. ^ Rochow 1966, pp. 28–29
  128. ^ Bagnall 1966, pp. 108, 120; Lidin 1996, passim
  129. ^ a b Smith 1921, p. 295; Sidgwick 1950, pp. 605, 608; Dunstan 1968, pp. 408, 438
  130. ^ Dunstan 1968, pp. 312, 408
  131. ^ Georgievskii 1982, p. 58
  132. ^ Lide & Frederikse 1998, p. 14–6
  133. ^ Hem 1985, p. 7
  134. ^ Perkins 1998, p. 350
  135. ^ Sanderson 2012
  136. ^ Brown et al. 2009, p. 137
  137. ^ Bresica et al. 1975, p. 137
  138. ^ Jansen 2005
  139. ^ a b Russell & Lee 2005, p. 246
  140. ^ Russell & Lee 2005, p. 244–5
  141. ^ Donohoe 1982, pp. 191–196; Russell & Lee 2005, pp. 244–247
  142. ^ Jackson 2000
  143. ^ Stoye 2014
  144. ^ Witt 1991; Endicott 1998
  145. ^ Dumé 2003
  146. ^ Benedict et al. 1946, p. 19
  147. ^ Noddack 1934, p. 653
  148. ^ Sacks 2001, p. 205: 'This story was told by Glenn Seaborg when he was presenting his recollections at a conference in November 1997.'
  149. ^ Hecker, Siegfried S. (2000). "Plutonium and its alloys: from atoms to microstructure" (PDF). Los Alamos Science. 26: 290–335. Archived (PDF) from the original on February 24, 2009. Retrieved February 15, 2009.
  150. ^ Tsiovkin, Yu.Yu.; Lukoyanov, A.V.; Shorikov, A.O.; Tsiovkina, L.Yu.; Dyachenko, A.A.; Bystrushkin, V.B.; Korotin, M.A.; Anisimov, V.I.; Dremov, V.V. (2011). "Electrical resistivity of pure transuranium metals under pressure". Journal of Nuclear Materials. 413 (1): 41–46. doi:10.1016/j.jnucmat.2011.03.053.
  151. ^ Dalhouse University 2015; White et al. 2015
  152. ^ a b DuPlessis 2007, p. 133
  153. ^ Gösele & Lehmann 1994, p. 19
  154. ^ Chen, Lee & Bosman 1994
  155. ^ a b Kovalev et al. 2001, p. 068301-1
  156. ^ Mikulec, Kirtland & Sailor 2002
  157. ^ Bychkov 2012, pp. 20–21; see also Lazaruk et al. 2007
  158. ^ Slezak 2014
  159. ^ Wiberg 2001, p. 758; see also Fraden 1951
  160. ^ Sacks 2001, p. 204
  161. ^ Sacks 2001, pp. 204–205
  162. ^ a b Cerkovnik & Plesničar 2013, p. 7930
  163. ^ Emsley 1994, p. 1910
  164. ^ a b Wiberg 2001, p. 497
  165. ^ Cross, Saunders & Prinzbach; Chemistry Views 2015
  166. ^ Sun, Xu & Gao 2013; Anthony 2013
  167. ^ Nakao 1992

References

[edit]
  • Addison WE 1964, The allotropy of the elements, Oldbourne Press, London
  • Adler D 1969, 'Half-way elements: The technology of metalloids', book review, Technology Review, vol. 72, no. 1, Oct/Nov, pp. 18–19
  • Benedict M, Alvarez LW, Bliss LA, English SG, Kinzell AB, Morrison P, English FH, Starr C & Williams WJ 1946, 'Technological control of atomic energy activities', "Bulletin of the Atomic Scientists", vol. 2, no. 11, pp. 18–29
  • Anthony S 2013, 'Graphene aerogel is seven times lighter than air, can balance on a blade of grass', ExtremeTech, April 10, accessed 8 February 2015
  • Antia, Meher. 1998, 'Focus: Levitating Liquid Boron', American Physical Society, viewed 14 December 2014
  • Appalakondaiah, S.; Vaitheeswaran, G.; Lebègue, S.; Christensen, N. E.; Svane, A. (2012-07-05). "Effect of van der Waals interactions on the structural and elastic properties of black phosphorus". Physical Review B. 86 (3). American Physical Society (APS): 035105. arXiv:1211.3512. Bibcode:2012PhRvB..86c5105A. doi:10.1103/physrevb.86.035105. ISSN 1098-0121. S2CID 118356764.
  • Askeland DR, Fulay PP & Wright JW 2011, The science and engineering of materials, 6th ed., Cengage Learning, Stamford, CT, ISBN 0-495-66802-8
  • Atkins P, Overton T, Rourke J, Weller M & Armstrong F 2006, Shriver & Atkins' inorganic chemistry, 4th ed., Oxford University Press, Oxford, ISBN 0-7167-4878-9
  • Austen K 2012, 'A factory for elements that barely exist', NewScientist, 21 Apr, p. 12, ISSN 1032-1233
  • Bagnall KW 1966, The chemistry of selenium, tellurium and polonium, Elsevier, Amsterdam
  • Bailar JC, Moeller T, Kleinberg J, Guss CO, Castellion ME & Metz C 1989, Chemistry, 3rd ed., Harcourt Brace Jovanovich, San Diego, ISBN 0-15-506456-8
  • Bassett LG, Bunce SC, Carter AE, Clark HM & Hollinger HB 1966, Principles of chemistry, Prentice-Hall, Englewood Cliffs, NJ
  • Batsanov SS & Batsanov AS 2012, Introduction to structural chemistry, Springer Science+Business Media, Dordrecht, ISBN 978-94-007-4770-8
  • Berei K & Vasáros L 1985, 'Astatine compounds', in Kugler & Keller
  • Betke, Ulf; Wickleder, Mathias S. (2011-01-05). "Sulfates of the Refractory Metals: Crystal Structure and Thermal Behavior of Nb2O2(SO4)3, MoO2(SO4), WO(SO4)2, and Two Modifications of Re2O5(SO4)2". Inorganic Chemistry. 50 (3). American Chemical Society (ACS): 858–872. doi:10.1021/ic101455z. ISSN 0020-1669. PMID 21207946.
  • Beveridge TJ, Hughes MN, Lee H, Leung KT, Poole RK, Savvaidis I, Silver S & Trevors JT 1997, 'Metal–microbe interactions: Contemporary approaches', in RK Poole (ed.), Advances in microbial physiology, vol. 38, Academic Press, San Diego, pp. 177–243, ISBN 0-12-027738-7
  • Bogoroditskii NP & Pasynkov VV 1967, Radio and electronic materials, Iliffe Books, London
  • Booth VH & Bloom ML 1972, Physical science: a study of matter and energy, Macmillan, New York
  • Born M & Wolf E 1999, Principles of optics: Electromagnetic theory of propagation, interference and diffraction of light, 7th ed., Cambridge University Press, Cambridge, ISBN 0-521-64222-1
  • Brassington, M. P.; Lambson, W. A.; Miller, A. J.; Saunders, G. A.; Yogurtçu, Y. K. (1980). "The second- and third-order elastic constants of amorphous arsenic". Philosophical Magazine B. 42 (1). Informa UK Limited: 127–148. Bibcode:1980PMagB..42..127B. doi:10.1080/01418638008225644. ISSN 1364-2812.
  • Brasted RC 1974, 'Oxygen group elements and their compounds', in The new Encyclopædia Britannica, vol. 13, Encyclopædia Britannica, Chicago, pp. 809–824
  • Brescia F, Arents J, Meislich H & Turk A 1975, Fundamentals of chemistry, 3rd ed., Academic Press, New York, p. 453, ISBN 978-0-12-132372-1
  • Brinkley SR 1945, Introductory general chemistry, 3rd ed., Macmillan, New York
  • Brown TL, LeMay HE, Bursten BE, Murphy CJ & Woodward P 2009, Chemistry: The Central Science, 11th ed., Pearson Education, New Jersey, ISBN 978-0-13-235-848-4
  • Burakowski T & Wierzchoń T 1999, Surface engineering of metals: Principles, equipment, technologies, CRC Press, Boca Raton, Fla, ISBN 0-8493-8225-4
  • Bychkov VL 2012, 'Unsolved Mystery of Ball Lightning', in Atomic Processes in Basic and Applied Physics, V Shevelko & H Tawara (eds), Springer Science & Business Media, Heidelberg, pp. 3–24, ISBN 978-3-642-25568-7
  • Carapella SC 1968a, 'Arsenic' in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 29–32
  • Cerkovnik, Janez; Plesničar, Božo (2013-06-28). "Recent Advances in the Chemistry of Hydrogen Trioxide (HOOOH)". Chemical Reviews. 113 (10). American Chemical Society (ACS): 7930–7951. doi:10.1021/cr300512s. ISSN 0009-2665. PMID 23808683.
  • Chang R 1994, Chemistry, 5th (international) ed., McGraw-Hill, New York
  • Chang R 2002, Chemistry, 7th ed., McGraw Hill, Boston
  • Chedd G 1969, Half-way elements: The technology of metalloids, Doubleday, New York
  • Chen, Zhiliang; Lee, Tzung-Yin; Bosman, Gijs (1994-06-20). "Electrical band gap of porous silicon". Applied Physics Letters. 64 (25). AIP Publishing: 3446–3448. Bibcode:1994ApPhL..64.3446C. doi:10.1063/1.111237. ISSN 0003-6951.
  • Chizhikov DM & Shchastlivyi VP 1968, Selenium and selenides, translated from the Russian by EM Elkin, Collet's, London
  • Choppin GR & Johnsen RH 1972, Introductory chemistry, Addison-Wesley, Reading, Massachusetts
  • Christensen RM 2012, 'Are the elements ductile or brittle: A nanoscale evaluation', in Failure theory for materials science and engineering, chapter 12, p. 14
  • Clementi, E.; Raimondi, D. L. (1963). "Atomic Screening Constants from SCF Functions". The Journal of Chemical Physics. 38 (11). AIP Publishing: 2686–2689. Bibcode:1963JChPh..38.2686C. doi:10.1063/1.1733573. ISSN 0021-9606.
  • Clementi, E.; Raimondi, D. L.; Reinhardt, W. P. (1967-08-15). "Atomic Screening Constants from SCF Functions. II. Atoms with 37 to 86 Electrons". The Journal of Chemical Physics. 47 (4). AIP Publishing: 1300–1307. Bibcode:1967JChPh..47.1300C. doi:10.1063/1.1712084. ISSN 0021-9606.
  • Cordes EH & Scaheffer R 1973, Chemistry, Harper & Row, New York
  • Cotton SA 1994, 'Scandium, yttrium & the lanthanides: Inorganic & coordination chemistry', in RB King (ed.), Encyclopedia of inorganic chemistry, 2nd ed., vol. 7, John Wiley & Sons, New York, pp. 3595–3616, ISBN 978-0-470-86078-6
  • Cox PA 2004, Inorganic chemistry, 2nd ed., Instant notes series, Bios Scientific, London, ISBN 1-85996-289-0
  • Cross, R. James; Saunders, Martin; Prinzbach, Horst (1999-09-29). "Putting Helium Inside Dodecahedrane". Organic Letters. 1 (9). American Chemical Society (ACS): 1479–1481. doi:10.1021/ol991037v. ISSN 1523-7060.
  • Cverna F 2002, ASM ready reference: Thermal properties of metals, ASM International, Materials Park, Ohio, ISBN 0-87170-768-3
  • Dalhouse University 2015, 'Dal chemist discovers new information about elemental boron', media release, 28 January, accessed 9 May 2015
  • Deming HG 1952, General chemistry: An elementary survey, 6th ed., John Wiley & Sons, New York
  • Desai, P. D.; James, H. M.; Ho, C. Y. (1984). "Electrical Resistivity of Aluminum and Manganese" (PDF). Journal of Physical and Chemical Reference Data. 13 (4). AIP Publishing: 1131–1172. Bibcode:1984JPCRD..13.1131D. doi:10.1063/1.555725. ISSN 0047-2689.
  • Donohoe J 1982, The Structures of the Elements, Robert E. Krieger, Malabar, Florida, ISBN 0-89874-230-7
  • Douglade, J.; Mercier, R. (1982-03-15). "Structure cristalline et covalence des liaisons dans le sulfate d'arsenic(III), As2(SO4)3". Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry. 38 (3). International Union of Crystallography (IUCr): 720–723. doi:10.1107/s056774088200394x. ISSN 0567-7408.
  • Dumé, Belle (23 April 2003). "Bismuth breaks half-life record for alpha decay". Physicsworld.
  • Dunstan S 1968, Principles of chemistry, D. Van Nostrand Company, London
  • Du Plessis M 2007, 'A Gravimetric Technique to Determine the Crystallite Size Distribution in High Porosity Nanoporous Silicon, in JA Martino, MA Pavanello & C Claeys (eds), Microelectronics Technology and Devices–SBMICRO 2007, vol. 9, no. 1, The Electrochemical Society, New Jersey, pp. 133–142, ISBN 978-1-56677-565-6
  • Eby GS, Waugh CL, Welch HE & Buckingham BH 1943, The physical sciences, Ginn and Company, Boston
  • Edwards, Peter P.; Sienko, M. J. (1983). "On the occurrence of metallic character in the periodic table of the elements". Journal of Chemical Education. 60 (9). American Chemical Society (ACS): 691–696. Bibcode:1983JChEd..60..691E. doi:10.1021/ed060p691. ISSN 0021-9584.
  • Edwards PP 1999, 'Chemically engineering the metallic, insulating and superconducting state of matter' in KR Seddon & M Zaworotko (eds), Crystal engineering: The design and application of functional solids, Kluwer Academic, Dordrecht, pp. 409–431
  • Edwards PP 2000, 'What, why and when is a metal?', in N Hall (ed.), The new chemistry, Cambridge University, Cambridge, pp. 85–114
  • Edwards, P. P.; Lodge, M. T. J.; Hensel, F.; Redmer, R. (2010-03-13). "'… a metal conducts and a non-metal doesn't'". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 368 (1914): 941–965. doi:10.1098/rsta.2009.0282. ISSN 1364-503X. PMC 3263814. PMID 20123742.
  • Eichler, R.; et al. (2007). "Chemical characterization of element 112". Nature. 447 (7140): 72–75. doi:10.1038/nature05761. ISSN 0028-0836.
  • Emsley 1994, 'Science: Surprise legacy of Germany's Flying Bombs', New Scientist, no. 1910, January 29
  • Emsley J 2001, Nature's building blocks: An A–Z guide to the elements, ISBN 0-19-850341-5
  • Endicott K 1998, 'The Trembling Edge of Science', Dartmouth Alumini Magazine, April, accessed 8 May 2015
  • Fraden, J. H. (1951). "Amorphous antimony. A lecture demonstration in allotropy". Journal of Chemical Education. 28 (1): 34-35. doi:10.1021/ed028p34. ISSN 0021-9584.
  • Furuseth, Sigrid; Selte, Kari; Hope, Håkon; Kjekshus, Arne; Klewe, Bernt; Powell, D. L. (1974). "Iodine Oxides. Part V. The Crystal Structure of (IO)2SO4". Acta Chemica Scandinavica. 28a: 71–76. doi:10.3891/acta.chem.scand.28a-0071. ISSN 0904-213X.
  • Georgievskii VI 1982, 'Biochemical regions. Mineral composition of feeds', in VI Georgievskii, BN Annenkov & VT Samokhin (eds), Mineral nutrition of animals: Studies in the agricultural and food sciences, Butterworths, London, pp. 57–68, ISBN 0-408-10770-7
  • Gillespie RJ & Robinson EA 1959, 'The sulphuric acid solvent system', in HJ Emeléus & AG Sharpe (eds), Advances in inorganic chemistry and radiochemistry, vol. 1, Academic Press, New York, pp. 386–424
  • Glazov VM, Chizhevskaya SN & Glagoleva NN 1969, Liquid semiconductors, Plenum, New York
  • Glinka N 1965, General chemistry, trans. D Sobolev, Gordon & Breach, New York
  • Gösele U & Lehmann V 1994, 'Porous Silicon Quantum Sponge Structures: Formation Mechanism, Preparation Methods and Some Properties', in Feng ZC & Tsu R (eds), Porous Silicon, World Scientific, Singapore, pp. 17–40, ISBN 981-02-1634-3
  • Greaves, G. N.; Greer, A. L.; Lakes, R. S.; Rouxel, T. (2011). "Poisson's ratio and modern materials". Nature Materials. 10 (11): 823–837. doi:10.1038/nmat3134. ISSN 1476-1122.
  • Greenwood NN & Earnshaw A 2002, Chemistry of the elements, 2nd ed., Butterworth-Heinemann, ISBN 0-7506-3365-4
  • Gschneidner, Karl A. (1964). "Physical Properties and Interrelationships of Metallic and Semimetallic Elements". Solid State Physics. Vol. 16. Elsevier. p. 275-426. doi:10.1016/s0081-1947(08)60518-4. ISBN 978-0-12-607716-2.
  • Gupta A, Awana VPS, Samanta SB, Kishan H & Narlikar AV 2005, 'Disordered superconductors' in AV Narlikar (ed.), Frontiers in superconducting materials, Springer-Verlag, Berlin, p. 502, ISBN 3-540-24513-8
  • Habashi F 2003, Metals from ores: an introduction to extractive metallurgy, Métallurgie Extractive Québec, Sainte Foy, Québec, ISBN 2-922686-04-3
  • Manson SS & Halford GR 2006, Fatigue and Durability of Structural Materials, ASM International, Materials Park, OH, ISBN 0-87170-825-6
  • Hampel CA & Hawley GG 1976, Glossary of chemical terms, Van Nostrand Reinhold, New York
  • Hem JD 1985, Study and interpretation of the chemical characteristics of natural water, paper 2254, 3rd ed., US Geological Society, Alexandria, Virginia
  • Hérold, Albert (2005-12-28). "An arrangement of the chemical elements in several classes inside the periodic table according to their common properties". Comptes Rendus. Chimie. 9 (1): 148–153. doi:10.1016/j.crci.2005.10.002. ISSN 1878-1543.
  • Herzfeld, K. F. (1927-05-01). "On Atomic Properties which make an Element a Metal". Physical Review. 29 (5): 701–705. doi:10.1103/PhysRev.29.701. ISSN 0031-899X.
  • Heslop RB & Robinson PL 1963, Inorganic chemistry: A guide to advanced study, Elsevier, Amsterdam
  • Hill G & Holman J 2000, Chemistry in context, 5th ed., Nelson Thornes, Cheltenham, ISBN 0-17-448307-4
  • Hiller LA & Herber RH 1960, Principles of chemistry, McGraw-Hill, New York
  • Holtzclaw HF, Robinson WR & Odom JD 1991, General chemistry, 9th ed., DC Heath, Lexington, ISBN 0-669-24429-5
  • Hopcroft, Matthew A.; Nix, William D.; Kenny, Thomas W. (2010). "What is the Young's Modulus of Silicon?". Journal of Microelectromechanical Systems. 19 (2): 229–238. doi:10.1109/JMEMS.2009.2039697. ISSN 1057-7157.
  • Chemistry Views 2012, 'Horst Prinzbach (1931 – 2012)', Wiley-VCH, accessed 28 February 2015
  • Huheey JE, Keiter EA & Keiter RL 1993, Principles of Structure & Reactivity, 4th ed., HarperCollins College Publishers, ISBN 0-06-042995-X
  • Hultgren HH 1966, 'Metalloids', in GL Clark & GG Hawley (eds), The encyclopedia of inorganic chemistry, 2nd ed., Reinhold Publishing, New York
  • Hunt A 2000, The complete A-Z chemistry handbook, 2nd ed., Hodder & Stoughton, London
  • Iler RK 1979, The chemistry of silica: solubility, polymerization, colloid and surface properties, and biochemistry, John Wiley, New York, ISBN 978-0-471-02404-0
  • Jackson, Mike (2000). "Wherefore Gadolinium? Magnetism of the Rare Earths". IRM Quarterly. 10 (3). Institute for Rock Magnetism: 6. Archived (PDF) from the original on 2017-07-12. Retrieved 2016-08-08.
  • Jansen, Martin (2005-11-30). "Effects of relativistic motion of electrons on the chemistry of gold and platinum". Solid State Sciences. 7 (12): 1464–1474. Bibcode:2005SSSci...7.1464J. doi:10.1016/j.solidstatesciences.2005.06.015.
  • Jauncey GEM 1948, Modern physics: A second course in college physics, D. Von Nostrand, New York
  • Jenkins GM & Kawamura K 1976, Polymeric carbons—carbon fibre, glass and char, Cambridge University Press, Cambridge
  • Keenan CW, Kleinfelter DC & Wood JH 1980, General college chemistry, 6th ed., Harper & Row, San Francisco, ISBN 0-06-043615-8
  • Keogh DW 2005, 'Actinides: Inorganic & coordination chemistry', in RB King (ed.), Encyclopedia of inorganic chemistry, 2nd ed., vol. 1, John Wiley & Sons, New York, pp. 2–32, ISBN 978-0-470-86078-6
  • Klein CA & Cardinale GF 1992, 'Young's modulus and Poisson's ratio of CVD diamond', in A Feldman & S Holly, SPIE Proceedings, vol. 1759, Diamond Optics V, pp. 178‒192, doi:10.1117/12.130771
  • Kneen WR, Rogers MJW & Simpson P 1972, Chemistry: Facts, patterns, and principles, Addison-Wesley, London
  • Kovalev, D.; Timoshenko, V. Yu.; Künzner, N.; Gross, E.; Koch, F. (2001-07-19). "Strong Explosive Interaction of Hydrogenated Porous Silicon with Oxygen at Cryogenic Temperatures". Physical Review Letters. 87 (6): 068301. doi:10.1103/PhysRevLett.87.068301. ISSN 0031-9007.
  • Kozyrev PT 1959, 'Deoxidized selenium and the dependence of its electrical conductivity on pressure. II', Physics of the solid state, translation of the journal Solid State Physics (Fizika tverdogo tela) of the Academy of Sciences of the USSR, vol. 1, pp. 102–110
  • Kugler HK & Keller C (eds) 1985, Gmelin Handbook of Inorganic and Organometallic chemistry, 8th ed., 'At, Astatine', system no. 8a, Springer-Verlag, Berlin, ISBN 3-540-93516-9
  • Lagrenaudie J 1953, 'Semiconductive properties of boron' (in French), Journal de chimie physique, vol. 50, nos. 11–12, Nov-Dec, pp. 629–633
  • Lazaruk, S. K.; Dolbik, A. V.; Labunov, V. A.; Borisenko, V. E. (2007). "Combustion and explosion of nanostructured silicon in microsystem devices". Semiconductors. 41 (9): 1113–1116. doi:10.1134/S1063782607090175. ISSN 1063-7826.
  • Legut, Dominik; Friák, Martin; Šob, Mojmír (2010-06-22). "Phase stability, elasticity, and theoretical strength of polonium from first principles". Physical Review B. 81 (21). doi:10.1103/PhysRevB.81.214118. ISSN 1098-0121.
  • Leith MM 1966, Velocity of sound in solid iodine, MSc thesis, University of British Columbia. Leith comments that, '... as iodine is anisotropic in many of its physical properties most attention was paid to two amorphous samples which were thought to give representative average values of the properties of iodine' (p. iii).
  • Lide DR & Frederikse HPR (eds) 1998, CRC Handbook of chemistry and physics, 79th ed., CRC Press, Boca Raton, Florida, ISBN 0-849-30479-2
  • Lidin RA 1996, Inorganic substances handbook, Begell House, New York, ISBN 1-56700-065-7
  • Andersen, A. Lindegaard; Dahle, Birgit (1966-01-01). "Fracture Phenomena in Amorphous Selenium". Journal of Applied Physics. 37 (1): 262–266. doi:10.1063/1.1707823. ISSN 0021-8979.
  • Mann, Joseph B.; Meek, Terry L.; Allen, Leland C. (2000-03-01). "Configuration Energies of the Main Group Elements". Journal of the American Chemical Society. 122 (12): 2780–2783. doi:10.1021/ja992866e. ISSN 0002-7863.
  • Marlowe MO 1970, Elastic properties of three grades of fine grained graphite to 2000 °C, NASA CR‒66933, National Aeronautics and Space Administration, Scientific and Technical Information Facility, College Park, Maryland
  • Martienssen W & Warlimont H (eds) 2005, Springer Handbook of Condensed Matter and Materials Data, Springer, Heidelberg, ISBN 3-540-30437-1
  • Matula, R. A. (1979-10-01). "Electrical resistivity of copper, gold, palladium, and silver". Journal of Physical and Chemical Reference Data. 8 (4): 1147–1298. doi:10.1063/1.555614. ISSN 0047-2689.
  • McQuarrie DA & Rock PA 1987, General chemistry, 3rd ed., WH Freeman, New York
  • Mendeléeff DI 1897, The Principles of Chemistry, vol. 2, 5th ed., trans. G Kamensky, AJ Greenaway (ed.), Longmans, Green & Co., London
  • Mercier, R.; Douglade, J. (1982-06-15). "Structure cristalline d'un oxysulfate d'arsenic(III) As2O(SO4)2 (ou As2O3.2SO3)". Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry. 38 (6): 1731–1735. doi:10.1107/S0567740882007055.
  • Metcalfe HC, Williams JE & Castka JF 1966, Modern chemistry, 3rd ed., Holt, Rinehart and Winston, New York
  • Mikulec, F.V.; Kirtland, J.D.; Sailor, M.J. (2002-01-04). "Explosive Nanocrystalline Porous Silicon and Its Use in Atomic Emission Spectroscopy". Advanced Materials. 14 (1). Wiley: 38–41. doi:10.1002/1521-4095(20020104)14:1<38::aid-adma38>3.0.co;2-z. ISSN 0935-9648.
  • Moss TS 1952, Photoconductivity in the Elements, London, Butterworths
  • Mott NF & Davis EA 2012, 'Electronic Processes in Non-Crystalline Materials', 2nd ed., Oxford University Press, Oxford, ISBN 978-0-19-964533-6
  • Nakao, Yukimichi (1992). "Dissolution of noble metals in halogen–halide–polar organic solvent systems". Journal of the Chemical Society, Chemical Communications (5): 426–427. doi:10.1039/C39920000426. ISSN 0022-4936.
  • Nemodruk AA & Karalova ZK 1969, Analytical chemistry of boron, R Kondor trans., Ann Arbor Humphrey Science, Ann Arbor, Michigan
  • New Scientist 1975, 'Chemistry on the islands of stability', 11 Sep, p. 574, ISSN 1032-1233
  • Noddack, Ida (1934-09-15). "Über das Element 93". Angewandte Chemie. 47 (37): 653–655. doi:10.1002/ange.19340473707. ISSN 0044-8249.
  • Olechna, Doris J.; Knox, Robert S. (1965-11-01). "Energy-Band Structure of Selenium Chains". Physical Review. 140 (3A): A986–A993. doi:10.1103/PhysRev.140.A986. ISSN 0031-899X.
  • Orton JW 2004, The story of semiconductors, Oxford University, Oxford, ISBN 0-19-853083-8
  • Parish RV 1977, The metallic elements, Longman, London
  • Partington JR 1944, A text-book of inorganic chemistry, 5th ed., Macmillan & Co., London
  • Pauling L 1988, General chemistry, Dover Publications, NY, ISBN 0-486-65622-5
  • Perkins D 1998, Mineralogy, Prentice Hall Books, Upper Saddle River, New Jersey, ISBN 0-02-394501-X
  • Pottenger FM & Bowes EE 1976, Fundamentals of chemistry, Scott, Foresman and Co., Glenview, Illinois
  • Qin, Jiaqian; Nishiyama, Norimasa; Ohfuji, Hiroaki; Shinmei, Toru; Lei, Li; He, Duanwei; Irifune, Tetsuo (2012). "Polycrystalline γ-boron: As hard as polycrystalline cubic boron nitride". Scripta Materialia. 67 (3): 257–260. arXiv:1203.1748. doi:10.1016/j.scriptamat.2012.04.032.
  • Rao, C.N.R.; Ganguly, P. (1986). "A new criterion for the metallicity of elements". Solid State Communications. 57 (1): 5–6. doi:10.1016/0038-1098(86)90659-9.
  • Rao KY 2002, Structural chemistry of glasses, Elsevier, Oxford, ISBN 0-08-043958-6
  • Raub CJ & Griffith WP 1980, 'Osmium and sulphur', in Gmelin handbook of inorganic chemistry, 8th ed., 'Os, Osmium: Supplement', K Swars (ed.), system no. 66, Springer-Verlag, Berlin, pp. 166–170, ISBN 3-540-93420-0
  • Ravindran, P.; Fast, Lars; Korzhavyi, P. A.; Johansson, B.; Wills, J.; Eriksson, O. (1998-11-01). "Density functional theory for calculation of elastic properties of orthorhombic crystals: Application to TiSi2". Journal of Applied Physics. 84 (9): 4891–4904. doi:10.1063/1.368733. ISSN 0021-8979.
  • Reynolds WN 1969, Physical properties of graphite, Elsevier, Amsterdam
  • Rochow EG 1966, The metalloids, DC Heath and Company, Boston
  • Rock PA & Gerhold GA 1974, Chemistry: Principles and applications, WB Saunders, Philadelphia
  • Russell JB 1981, General chemistry, McGraw-Hill, Auckland
  • Russell AM & Lee KL 2005, Structure-property relations in nonferrous metals, Wiley-Interscience, New York, ISBN 0-471-64952-X
  • Sacks O 2001, Uncle Tungsten: Memories of a chemical boyhood, Alfred A Knopf, New York, ISBN 0-375-40448-1
  • Sanderson RT 1960, Chemical periodicity, Reinhold Publishing, New York
  • Sanderson RT 1967, Inorganic chemistry, Reinhold, New York
  • Sanderson K 2012, 'Stinky rocks hide Earth's only haven for natural fluorine', Nature News, July, doi:10.1038/nature.2012.10992
  • Schaefer JC 1968, 'Boron' in CA Hampel (ed.), The encyclopedia of the chemical elements, Reinhold, New York, pp. 73–81
  • Sidgwick NV 1950, The chemical elements and their compounds, vol. 1, Clarendon, Oxford
  • Sidorov, T. A. (1960). "The connection between structural oxides and their tendency to glass formation". Glass and Ceramics. 17 (11): 599–603. doi:10.1007/BF00670116. ISSN 0361-7610.
  • Sisler HH 1973, Electronic structure, properties, and the periodic law, Van Nostrand, New York
  • Slezak 2014, 'Natural ball lightning probed for the first time', New Scientist, 16 January
  • Slough W 1972, 'Discussion of session 2b: Crystal structure and bond mechanism of metallic compounds', in O Kubaschewski (ed.), Metallurgical chemistry, proceedings of a symposium held at Brunel University and the National Physical Laboratory on the 14, 15 and 16 July 1971, Her Majesty's Stationery Office [for the] National Physical Laboratory, London
  • Slyh JA 1955, 'Graphite', in JF Hogerton & RC Grass (eds), Reactor handbook: Materials, US Atomic Energy Commission, McGraw Hill, New York, pp. 133‒154
  • Smith A 1921, General chemistry for colleges, 2nd ed., Century, New York
  • Sneed MC 1954, General college chemistry, Van Nostrand, New York
  • Sommer, A. (1943). "Alloys of Gold with Alkali Metals". Nature. 152 (3851): 215–215. doi:10.1038/152215a0. ISSN 0028-0836.
  • Soverna S 2004, 'Indication for a gaseous element 112', in U Grundinger (ed.), GSI Scientific Report 2003, GSI Report 2004-1, p. 187, ISSN 0174-0814
  • Stoker HS 2010, General, organic, and biological chemistry, 5th ed., Brooks/Cole, Cengage Learning, Belmont CA, ISBN 0-495-83146-8
  • Stoye, E., 2014, 'Iridium forms compound in +9 oxidation state', Chemistry World, 22 October 2014
  • Sun, Haiyan; Xu, Zhen; Gao, Chao (2013-05-14). "Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels". Advanced Materials. 25 (18): 2554–2560. doi:10.1002/adma.201204576. ISSN 0935-9648.
  • Rao, R. V. G. Sundara (1950). "Elastic constants of orthorhombic sulphur". Proceedings of the Indian Academy of Sciences - Section A. 32 (4): 275-278. doi:10.1007/BF03170831. ISSN 0370-0089.
  • Sundara Rao RVG 1954, 'Erratum to: Elastic constants of orthorhombic sulphur', Proceedings of the Indian Academy of Sciences, Section A, vol. 40, no. 3, p. 151
  • Swalin RA 1962, Thermodynamics of solids, John Wiley & Sons, New York
  • Tilley RJD 2004, Understanding solids: The science of materials, 4th ed., John Wiley, New York
  • Walker JD, Newman MC & Enache M 2013, Fundamental QSARs for metal ions, CRC Press, Boca Raton, ISBN 978-1-4200-8434-4
  • White, Mary Anne; Cerqueira, Anthony B.; Whitman, Catherine A.; Johnson, Michel B.; Ogitsu, Tadashi (2015-03-16). "Determination of Phase Stability of Elemental Boron". Angewandte Chemie International Edition. 54 (12): 3626–3629. doi:10.1002/anie.201409169. ISSN 1433-7851.
  • Wiberg N 2001, Inorganic chemistry, Academic Press, San Diego, ISBN 0-12-352651-5
  • Wickleder, M. S.; Pley, M.; Büchner, O. (2006). "Sulfates of Precious Metals: Fascinating Chemistry of Potential Materials". Zeitschrift für anorganische und allgemeine Chemie. 632 (12–13): 2080–2080. doi:10.1002/zaac.200670009. ISSN 0044-2313.
  • Wickleder MS 2007, 'Chalcogen-oxygen chemistry', in FA Devillanova (ed.), Handbook of chalcogen chemistry: new perspectives in sulfur, selenium and tellurium, RSC, Cambridge, pp. 344–377, ISBN 978-0-85404-366-8
  • Wilson JR 1965, 'The structure of liquid metals and alloys', Metallurgical reviews, vol. 10, p. 502
  • Wilson AH 1966, Thermodynamics and statistical mechanics, Cambridge University, Cambridge
  • Witczak Z, Goncharova VA & Witczak PP 2000, 'Irreversible effect of hydrostatic pressure on the elastic properties of polycrystalline tellurium', in MH Manghnani, WJ Nellis & MF Nicol (eds), Science and technology of high pressure: Proceedings of the International Conference on High Pressure Science and Technology (AIRAPT-17), Honolulu, Hawaii, 25‒30 July 1999, vol. 2, Universities Press, Hyderabad, pp. 822‒825, ISBN 81-7371-339-1
  • Witt SF 1991, 'Dimethylmercury', Occupational Safety & Health Administration Hazard Information Bulletin, US Department of Labor, February 15, accessed 8 May 2015
  • Wittenberg, Layton J.; DeWitt, Robert (1972-05-01). "Volume Contraction During Melting; Emphasis on Lanthanide and Actinide Metals". The Journal of Chemical Physics. 56 (9): 4526–4533. doi:10.1063/1.1677899. ISSN 0021-9606.
  • Wulfsberg G 2000, Inorganic chemistry, University Science Books, Sausalito CA, ISBN 1-891389-01-7
  • Young RV & Sessine S (eds) 2000, World of chemistry, Gale Group, Farmington Hills, Michigan
  • Zhigal'skii GP & Jones BK 2003, Physical properties of thin metal films, Taylor & Francis, London, ISBN 0-415-28390-6
  • Zuckerman & Hagen (eds) 1991, Inorganic reactions and methods, vol, 5: The formation of bonds to group VIB (O, S, Se, Te, Po) elements (part 1), VCH Publishers, Deerfield Beach, Fla, ISBN 0-89573-250-5